• Blanco

Non-Hydro Bath

When design and ergonomics meet, a new unique bath is born.


Rectangular non-hydro 160x80

REF: 62561

With a clean design, the MITTA bath stands out for its comfort.
It offers the option of front and side panel that complement the cubist design of the bath.
Price does not include chassis, side or front skirting panel.
Retail price:

Ref 62561

01 White
Ref Product/Set Measurements €/u
62561Bath without chassis and without waste.160 x 80 cm
41563Chassis with adjustable feet for free-standing bath Mitta 80 cm.
67429Front skirting panel 160 x 50 cm.160 cm
67430Side skirting panel 80 x 50 cm.80 cm
41190Headrest. Polyurethane light grey.

Mitta without chassis and without waste. / 20 kg. / 10 units pallet. Capacity 211 l.

Useful information

Gala baths may be purchased with or without skirting panel. The location of the hydromassage system facilitates the installation of the enclosure. The chassis is free-standing, enabling its installation with the least possible disruption. The disinfectant for hydromassage baths with automatic disinfection is available at Gala.


Gala products are guaranteed against any manufacturing defects, from the date of purchase of the product, only if the installation has been carried out in accordance with Gala´s installation instructions and, applying the current legislation on electrical and sanitary appliances, by authorised staff. The guarantee period for acrylic products is of 2 years.

Please check our product installation manuals.


High quality is a constant at Gala in order to guarantee the technical and aesthetic features as well as the performance of our products. Please check our product quality certificates.


Cleaning of the bath should be carried out using a soft sponge, soap and water. After cleaning, the bath should be dried so as to prevent limescale forming. No abrasive products, solvents or objects that could damage the bath surface should be used. Should the bath surface be scratched accidentally, it should be enough just to go over the surface with a solvent-free polish. If necessary, the scratch can first be wet-sanded with 800 G wet-and-dry sandpaper, then wet-sanded with 1200 G paper, before finally applying the polish.

±2 MB Download website product sheet (.PDF)


171.88 KBRectangular non-hydro 160x80 - Técnico (.AI)
514.09 KBRectangular non-hydro 160x80 - Técnico (.DWG)
4.65 MBRectangular non-hydro 160x80 - Técnico (.DXF)
186.61 KBRectangular non-hydro 160x80 - Técnico (.PDF)


293.09 KBRectangular non-hydro 160x80 - 3D (.DWG)

please wait…