- Electronic push-button. Activated with a simple touch.
- Side jet with water-air massage. Stimulation of the capillary, lymphatic and cardiovascular circulation.
- Bottom jet. A relaxing massage on your legs to alleviate the stress of the day.
- Intensity control of the jets softening or reinforcing their power.
- Blanco
Sensitive Flex Center System
Flex center
Sensitive Flex Center. Hydromassage Water+Air 180x100. "L" Left hand black skirting panel
REF: 65591
Ref 65591
- COLOURS/FINISHES
-
01 White
- ARTICLES
-
Ref Product/Set Measurements €/u 65591 Hydromassage bath water+air, electronic push-button, intensity control for water and air
massages, water level indicator and lower back/feet jets.180 x 100 cm - PRODUCT INFORMATION
-
Features
Flex Center hydromassage water+air, electronic push-button, intensity control for water and air massages, water level indicator, 4 side jets, 6 lower back/feet jets and 12 bottom jets (air). With special "L" front or side black skirting panel . Left-hand.
Useful information
Gala baths may be purchased with or without skirting panel. The location of the hydromassage system facilitates the installation of the enclosure. The chassis is free-standing, enabling its installation with the least possible disruption. The disinfectant for hydromassage baths with automatic disinfection is available at Gala.
Guarantee
Gala products are guaranteed against any manufacturing defects, from the date of purchase of the product, only if the installation has been carried out in accordance with Gala´s installation instructions and, applying the current legislation on electrical and sanitary appliances, by authorised staff. The guarantee period for acrylic products is of 2 years.
Certificates
High quality is a constant at Gala in order to guarantee the technical and aesthetic features as well as the performance of our products. Please check our product quality certificates.
Maintenance
Cleaning of the bath should be carried out using a soft sponge, soap and water. After cleaning, the bath should be dried so as to prevent limescale forming. No abrasive products, solvents or objects that could damage the bath surface should be used. Should the bath surface be scratched accidentally, it should be enough just to go over the surface with a solvent-free polish. If necessary, the scratch can first be wet-sanded with 800 G wet-and-dry sandpaper, then wet-sanded with 1200 G paper, before finally applying the polish.
- SETTING
- TECHNICAL DRAWINGS
- Downloads